Technical details

SCLAK is compatible with any type of electric lock in the world. It can be used together with other type of access control system and traditional keys. It doesn’t require any internet connection in order to work.
SCLAK works with any smartphone with Bluetootht 4.0 running iOS 8 or higher or Android 4.3 or higher.

Dimension 50x50x24 mm
Power AC-DC 12-24V
Power consumption Max 1W
Output NO rele contact (monostable)
Max output 1A
Certification CE conformity marking
Operating temperature -20° + 60° C
Frequency 2.4 GHZ
Protection IP44 if installed in conformity of the dispositions
Connection Bluetooth 4.1 BT

READ CAREFULLY

  • Please read the instructions carefully
  • Start the wiring process after having turned off the main power
  • Use the cables provided in the box or standard cables with minimum diameter of 1mm
  • Make sure the SCLAK unit is powered with 12-24V AC-DC
  • Do not connect the SCLAK unit to high voltage power
  • Do not put the SCLAK unit in the water. In order to protect the unit please read carefully the installation instructions provided in this manual

Installation Instructions

1. LOCATE YOUR LOCK
1. LOCATE YOUR LOCK

Locate the lock you wish to use with SCLAK. Locate the power cord and check that it is correctly connected to a 12/24V DC-AC power source. Ensure there are control and opening buttons.

2. VERIFY THE CONTENT OF THE BOX
2. VERIFY THE CONTENT OF THE BOX

SCLAK unit, 4xT8 TORX screws for SCLAK unit, 2x seals, 1xJumper (possible to use with terminal boards), 2xWood screws, 2xIron screws, 2xWall plugs, 50cm power cable, 1xDouble-sided adhesive, 2xWall plugs, 1xScrewdriver with T8 TORX and 3mm SLOT heads and 1XSCLAK sticker, 1 PVC mask, installation manual, activation code and guaranty.

3. POSITION THE SCLAK UNIT
3. POSITION THE SCLAK UNIT

Place the SCLAK unit in the correct position for installation. For best results we recommend positioning the unit close to the existing lock. If this not possible, then position it close to the relevant switch.

4. DRILL HOLES AND FIX THE UNIT
4. DRILL HOLES AND FIX THE UNIT

After positioning the SCLAK unit with the double-sided adhesive, drill holes to correctly fix the unit to the base. The base can be fixed to wooden or metallic doorframes or to walls using the appropriate supplied screws.

5. INSERT CABLES
5. INSERT CABLES

The power and connection cables can now be inserted into the base either through the holes on the bottom side or on the base of the SCLAK unit. Use the most appropriate holes.

6. CONNECTION GUIDE
6. CONNECTION GUIDE

Remove the lock cover, disconnect the power cable and connect this to the SCLAK unit.
Use another cable to connect the SCLAK unit to the lock. Use the following illustration to select the correct connection option for your lock.

CONNECTION GUIDE

Download detailed installation instructions!

Activate SCLAK

1. In order to activate the SCLAK unit it’s necessary to use a compatible smartphone and the activation codes provided in the box.
3. Look at the tutorial and then click on the button INSERT CODE and insert the 12 numbers code printed on a card inside the box.
2. Dowload the free SCLAK app from the app store (either iOS or Android).
4. Follow the instructions on the mobile app. The system will ask you to register with your email and password. Once you have completed the procedure you will be able to invite an admin. You can refer to the setup tutorial in the app.

Note: the installer won’t be able to operate the SCLAK unit once the installation process is terminated.

SECURITY

  • Secure Bluetooth® connection using DeepCover® Secure Memory with crypted algorythm SHA256
  • Ability to define a passcode on the smartphone to access the application
  • Smartphone management: all users can enable or disable the smartphone that are connected through their profile
  • User management: admin and owners can enable and disable the guets they have previosuly created